Frequently Asked Questions Here is a categorized list of the most frequently asked questions we receive. Pull sizing is where it can be tricky. Modern cabinetry tends to have clean lines and edges with a sleek, minimal profile that is smooth to the touch. Anywhere within this range will work as it is based on personal preference. You can also consider using knobs and pulls together for a. space is what you want, then sleek pulls all over are a great option. Additionally you can add strips of wood (moldings) to the glass panels, giving them a more decorative aesthetic. If its for a drawer, longer bar pulls can add a contemporary feel to the kitchen. How to Install Handles and Knobs on Shaker Drawer Fronts Table of Contents Getting ready to install handles and knobs on your Shaker drawer fronts? When thinking about hardware type, try to envision what will feel the most functional for your lifestyle. The thing to keep in mind with cabinet pulls has to do with placing them vertically or horizontally.
With so many unique designs, it is easy to give your cabinets a designer touch. 
Latch pulls work well to accent a few doors in a transitional, traditional or farmhouse-inspired kitchen, giving a sense of sophistication and a certain visual richness. First, pulls are typically a little easier to use than knobs, making them an excellent choice for homes with weak or arthritic hands. If you have additional questions, contact us! Just remember, take your time. Popular Cabinet Door Styles for Kitchens of All Kinds, New This Week: 4 Kitchens With Colorful Cabinets, New This Week: 3 Attractive Kitchens With Wood Cabinets, How to Choose the Right Depth for Your Kitchen Sink, 15 Ways to Kick Your Kitchen Island Up a Notch, How to Choose the Best Sink Type for Your Kitchen. Using a pull that is approximately 1/3 the length of the drawer is a good rule of thumb. Once you have decided on if you will use pulls or knobs (or a mix of both), its time to decide. Shaker Cabinets: Your Hardware Placement Guide Table of Contents Hardware cabinet placement is a critical part of bringing the aesthetics of a room together. The above suggestions are not strict rules. Also, its been found a longer bar pull is better suited for seniors who need to use their whole hand instead of just their fingertips to open the drawers. If you want to elevate existing furniture (such as a side table or media console), you may decide that small knobs add the perfect amount of visual impact over a longer pull. With that said, there are plenty of exceptions. The options for style, size and finish are just so abundant, and many kitchens need a carefully thought-out combination of knobs, handles and other hardware to convey the perfect look. Copyright 2022 Schoolhouse. You cant go wrong if you stay within this range. Regardless of the type of cabinet you have, any look (. We want to see you work like a pro when it comes to cabinet hardware placement. The problem with this placement is that it can tend to create a very busy look in the room, especially if there are multiple cabinets and a lot of woodworking detail. For a more classic look, consider offsetting your knobs from the rail a bit. Some of the most common questions we hear about cabinet hardware are, "What size do I get?" Anywhere within this range will work as it is based on personal preference.
So, whether youre building a brand new kitchen, working on a bathroom remodel, or simply want to swap outsome existing hardware on a thrifted furniture find, weve put together a simple and straightforward how-to, to help you choose the perfect cabinet hardware for your space. Just like on larger drawers, pulls should be placed horizontally. When you think of a classic style cabinet door, the Raised Panel design is probably what comes to mind. Considering how long should bar pulls be is central in determining what the new look of your kitchen will be. For slab doors, you will want the hole placement to be equidistant from the bottom and side of the cabinet. Limit the lengths of the bar pulls to three different sizes to complement and give visual consistency to the cabinetry. Perfect results every time on any cabinet door or drawer front. Adjust the screw hole placement accordingly if necessary. So rather than installing two separate standard-size pulls, you are only installing one larger pull handle. Hardware with ridges, curved silhouettes, and textured detailing typically work well with traditional or heritage-inspired designs. Sign up for exclusive offers, new product announcements, and more. There are three main options for these transitional style panels: Recessed, Shaker and Mullion. Knobs have smaller profiles than handles, are less expensive, and can be used for both drawers and cabinets. Do you want your space to have a modern feel or more traditional? Create simple rules for yourself about which type of hardware will go on each cabinet. It simply comes down to personal preference. All Rights Reserved. Bin pulls tend to look best installed centered and running horizontally, and they also function best on drawers and pullouts. And when you think about the countless times that cabinet hardware is used throughout everyday undertakings, it becomes clear that the value and joy that a well-made piece of hardware brings is well worth the investment. With all these moving parts, it can be hard to remember that design is in the details too. Another option is to simply purchase a few pulls. For the best of both worlds, use a mixture of knobs and pulls. Should you go for a basic look or decorative alternative? Click Here to shop some of our favorite knobs. They work their very best on narrow drawers, but they can work fine for wider drawers (especially when installed in pairs) and swinging cabinets.
They tend to complement drawers or larger cabinets with their linear shape. This size looks pleasing on most cabinets, while still being large enough to grip comfortably. The below bathroom is an example of a traditional design utilizing all knobs. Traditional pull handles come in a few varieties, one of which is bin pulls, pictured below. This installation is both attractive and functional. Next, youll want to consider the finish. This contemporary knob placement is both aesthetically pleasing and easy for installers. On a drawer this size, a single handle is a bit more functional because it can be pulled with one hand or two. However, using longer pulls depend on the width of the drawer. The gold color rounds out the room with a highly modern look. You can cut circles out of painters tape to test placement. Because they are the same width, the length of the bar pull should be consistent on each drawer. Pull handles can also provide a traditional feel to a room. A modern appearance for cabinet doors can be found by using a slab of wood (or solid material). So, which should you pick? 2022 . Not only does it match with all finishes, but it also keeps your space feeling clean and well-coordinated. Whichever items you decide to keep in these cabinets will be on full display. Every so often we will break this rule for small drawers or small spaces, such as bathrooms. Suddenly a kitchen feels cluttered, a bathroom looks disorganized and tacky, you find yourself avoiding specific rooms. If you cant find the answer you are looking. Swapping out cabinet hardware is also less costly than an entire kitchen remodel. There are different tips and tricks we have listed below that work, depending on if you are using knobs or pulls on your cabinet doors. You've picked out your cabinet hardware and it's time to install. Hopefully, this simple how-to serves as a helpful starting point when shopping for cabinet hardware. You can also consider using knobs and pulls together for a semi-modern design style. In a compact kitchen with fewer than 12 doors and drawers, its a good idea to use just one style of handle all over, and introduce interest somewhere else, such as an open shelf. You want your cabinets to look professionally done and most importantly you want to be able to use them. In general, warmer toned spaces with brass cabinetry have a vintage feel to them, while cooler tones with darkercabinet hardware lean more contemporary. If you do have a situation where you regret the placement of holes (drilled by you or a previous owner), you can avoid having to replace or refinish the doors by choosing new hardware with a coordinating backplate, which will cover the unused holes and add an additional gleaming accent. The exception to this is when the height of a drawer front is greater than 12 in this case, we recommend placing the hardware towards the top of the drawer front. All cabinets have door panels and most cabinets also have door rails and door stiles. The second option we recommend if using a combination of knobs and pulls is to put knobs on all doors and pulls on all drawers. You can also shop our favorite cabinet hardware picks here: Click Here, 5710 Kearny Villa RoadSan Diego, CA 921231.858.576.1892Team@SanDiegoHardware.com. . You do not want your pulls extending into the rail. Right here, actually. However, some prefer to install their hardware within the top rail where it is somewhat easier to reach and pull. Contact us at Arthur Harris to learn more! For example, in this kitchen (and the previous), accent knobs are used just on the upper cabinets, so the change in materials is very obviously planned and rhythmic. However, if you split them they should follow a vertical line at counter height, or else you should pick one style to use on the whole pantry area, so theres a subtle consistency the eye can pick up on. Think of the rails and stiles as a support system for the door panel, forming a square (or rectangle) around it. Our go-to recommendations are below. Stick with the rule of thirds for multiple pulls on a drawer. The kitchen below utilizes all pulls of varying sizes. The gold color rounds out the room with a highly modern look. If you choose to use a smaller size throughout, we highly recommend using two pulls on wide drawers. Using two pulls or knobs for a large drawer also works great.. OurCOMPLETE hardware drilling solution includes theRapid Center Extensionfor quick centering on drawer fronts and theLong Pull & Shelf Pin Extensionsfor hardware up to 38 and shelf pins with 32mm spacing. Door and drawer cabinet hardware placement is such an easy way to create a significant subtle style and functional impact on a space within your home. For modern cabinetry, installing all of your knobs or pulls towards the top gives a sleek and streamlined aesthetic. Knobs and pulls have the same function, but they also bring their own set of style to a room. To make the combination look harmonious, we suggest one of two options. exactly to install them on doors and drawers. Working with high-grade materials will significantly speed up the project. There are two purposes when it comes to cabinet hardware placement: functionality and appearance. Pulls will look great when they are placed directly in the corner of doors. But dont worry, following these tips will give you the assurance and accuracy of a professional in a matter of minutes. If you want a space that leans towards more of the. You want it to be accurate. Style and function are equally important aspects of a cabinet hardware project. While there are no hard and fast rules, its generally a lot easier to open a cabinet with a knob and a drawer with a pull. Posted by Arthur Harris & filed under Company News. It may be utilitarian to use longer pulls on heavier drawers that take two hands to open. Toronto Interior Design Group is a trusted one-stop-shop residential interior design boutique-style firm crafting timeless interiors. You can place the knobs just above or below the corner of the cabinet door frame. Sizes of drawers and cabinets throughout the kitchen come in many sizes and shapes. When in doubt, use painters tape to mark out ideas for hardware placement. Houzz Pro: One simple solution for contractors and design pros. All rights reserved. This is the truest-of-true traditional looks.
In the end, experimentation is the best way to dial in your personal preference because every room has its own unique set of requirements. This can offer a cleaner, more contemporary appearance and it also is easier to operate your drawers with.
When using hardware with small metal elements (such as a crystal knob that has a metal neck), its best to match that metal to your other metal hardware. By placing the rail horizontally above the door panel and the stile vertically next to the door panel, they form a joint to hold the panel in place. For small drawers (less than 24 wide) center the knobs or pulls in both directions. One of the most popular options is to pick one size and use it throughout your cabinetry. You want it to be simple. Before getting started with installing your cabinet hardware, youll need to decide which type of cabinet hardware you want to use knobs or pulls or both. If you are going for a traditional look and using knobs for your cabinets, you have several options when it comes to deciding where to place the knobs: You can place the knobs in the lower corner of the cabinet door frame. Copyright 2020 True Position Tools. In addition to having a modern look, a slab of wood for the door panel is also considered very European. None of the areas are perfectly symmetrical, but the way each handle suits the function of its door front gives its own sense of elegance. It requires thoughtful attention (especially if it is your first install). Finger pulls arent usually mixed with other cabinet styles because they tend to appear in modern, minimalist kitchens. When it comes to installing cabinet door handles (either knobs or pulls), they are always placed on the opposite side from the door hinges. Regardless of the type of cabinet you have, any look (traditional, transitional and modern) can be achieved.
And hardware is a detail that can easily become an afterthought.
Many first-time installers make the mistake of using outdated, cheap plastic tools. Install them on two or three cabinets to try them out. This simple change in placement will take your traditional cabinet-look up a notch. Shaker cabinet door panels are one of the most popular cabinet options out there and for good reason. Keep in mind, youll want to make sure you are tall enough to reach the knobs, since they will be placed higher up. The first suggestion is to put knobs on all upper cabinets and pulls on all lower cabinets. If its aesthetically pleasing, one long bar pull may be an option rather than two smaller ones on wider drawers. For pulls, you will want the end of the pull to be in this position. The first decision you must make is if you'd like to use knobs, pulls, or a mixture. No one has time for costly do-overs. If this is your first time with cabinet hardware placement, there are few things people tend to make a mistake with and one of them is rushing the project. For pulls, you want the bottom of your pull to fall in line with the cabinet rail. This makes it much easier to open. That is why we have decided to put together our best tips for making sure you place your hardware correctly. Before making a final decision on your new hardware, here are a couple of suggestions to try before making a commitment. First things first. Too small and the cabinet will overwhelm the hardware.
They are slightly easier to install than pulls since you only need one screw to secure the knob to the surface. Mullion cabinet door panels have glass panes as their door panels. Your answer to this question will determine which styles of knobs and pulls you use. There are many options for sizes and many configurations to choose from. As mentioned above, choosing longer bar pulls for wider drawers can be an option. Pulls will look great when they are placed directly in the corner of doors. But, The Most Accurate Way to Install Cabinet Hardware Table of Contents An easy way to have a home reflect your personal style as a homeowner, Cabinet Hardware Jigs vs. Templates Which Is Best for Your Cabinet Business There are many different variables to creating and running a successful cabinetry, How to Install Cabinet Door Handles Table of Contents Replacing or adding cabinet door handles is a great way to update a room. The thing to keep in mind with cabinet pulls has to do with placing them. Pulls should be placed horizontally on drawers. Whether you are building a new bathroom with fancy drawer pulls or putting in some traditional cabinet knobs in your kitchen, hardware placement is something you want to make sure and get right the first time. Anytime you are installing cabinet hardware, the below are tried-and-true rules to follow when deciding between the different designs of knobs or pulls: If you want a space that leans towards more of the traditional side, the general rule to follow is knobs on doors and pulls on drawers. Install knobs and handles in seconds with the most accurate jig on the market. Stacked drawers often come in different heights to serve different storage functions. One, place a piece of painters tape the length and color of the bar pull you are considering onseveral cabinets or drawers.
For paneled drawers, the most aesthetic choice is typically to center the hardware within the panel. All Rights Reserved. The height of drawer fronts vary, but you can usually place your hardware in the center of your drawer front with most height ranges. It helps to know some basic details about door designs before getting into the hardware placement. Pulls also reduce the amount of contact your hands have with your cabinets, which helps to keep your cabinetry clean. We understand that installing knobs and pulls on cabinets can feel difficult if you dont feel confident. Pulls are larger than knobs, make more of a statement, and tend to be easier to grip. Another common mistake people make is choosing style, function they opt for a great looking door handle, but placed in an odd position, changing the way the door has to be opened. It helps to know some basic details about door designs before getting into the hardware placement.
